P.M. Print Lab
Directional Honda Grom Wheel stripes "Rim Tape" V2
Directional Honda Grom Wheel stripes "Rim Tape" V2
Не удалось загрузить сведения о доступности самовывоза
These are Directional Honda Grom Wheel stripes or "Rim Tape" as some may call it. These will set your bike apart from the rest. That one simple thing to make your bike a little different in a sea of Grom's. These are made of the highest quality vinyl and Laminated for Uv and abrasive protection.
Comes with 8 pieces.
4 one direction 4 for the other direction.
2 for each side of each wheel.
Colors:
-Grasshopper Green(similar to Neon ish yellow)
-Red,
-Light Blue,
-Orange,
-Bright Green
-Blue
Email if there is a color you would like we can try and fit your needs.
Install instructions:
Apply on a clean bike...
1: Wash your hands
2: Degreaser to clean the application area on the wheel.
3: Clean with Rubbing alcohol.
4: Dry the area
5: Remove the stripe and apply slowly, from one end to the other. (take your time) When applying the 2nd strip find the center of the wheel. Then start from the center so its even with the opposite side There is a gap in-between the stripes on both sides.
6: After all are installed Take a hairdryer or Heat gun and heat them so they are very warm not hot to the touch but close (Do Not burn them). That will lock them into place.
![Directional Honda Grom Wheel stripes "Rim Tape" V2](http://www.pmprintlab.com/cdn/shop/products/ScreenShot2022-04-07at9.55.36PM.png?v=1649396516&width=1445)